Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Beverly Hills
Garage door installation in Beverly Hills runs $700-$2,200 for most doors, with custom oversized openings and premium wood doors landing at the upper end of that range. We install everything from single-car doors on Flats side streets to 16-foot custom steel doors on Trousdale Estates motor courts. If you’re replacing a door in Beverly Hills, call (213) 348-6550 and we’ll give you a written price before any work starts.
Beverly Hills is not a standard market. The housing stock, the door sizes, the automation expectations, the client’s car collection: it all changes how an installation gets done. Our team does Garage Door Installation work across the city and we quote every job the same way. A flat number, in writing, with the scope spelled out. No “call for a quote” runaround. Clause 1 of The Haven Standard.
Why Servo Garage Doors Los Angeles Is Beverly Hills’s Preferred Garage Door Installation Company
We’ve handled enough Beverly Hills installs to know what the job actually involves before we arrive. A 1928 Spanish Colonial in the Flats has different door framing than a 1962 Trousdale modern with 4 inches of headroom. The client’s expectations are different too. People in Beverly Hills don’t want a door. They want a door that opens from the same Crestron panel as the rest of the house, at the exact width their McLaren needs, with a photo record of what was done when we leave.
Marcus Deller leads our team, and he set the rule that still governs every visit: our technicians photograph the failed component before quoting a replacement. That’s Clause 4 of The Haven Standard. You see what we saw. The price is delivered in writing before work begins. There’s no “well, once we got into it” conversation after the fact.
We answer calls from Beverly Hills homeowners with a live person, 24/7. Not a callback window. When you call (213) 348-6550, you get a human being, a scheduled time, and an on-the-way text with the technician’s name. Every job closes with a documented photo record: what we found, what we installed, what it looks like finished.
Our Garage Door Installation Services in Beverly Hills
New Door Installation
Most Beverly Hills replacements start with a door that’s structurally fine but wrong for the house. Maybe it’s a builder-grade steel door on a 1920s Tudor in the Flats. Maybe it’s an original tilt-up that sags and groans every time it opens. We measure the opening, photograph the existing hardware, and price the new door as a line item before touching anything. A standard new door installation in Beverly Hills runs $700-$2,200 depending on width, material, and automation requirements.
Single Car Door
Single-car doors in Beverly Hills are often the easiest job and the most overlooked. On older Flats homes, the single door may sit on original 1940s track with a spring that was last replaced during the Reagan administration. A new single door with a LiftMaster opener, fresh torsion springs, and properly aligned track typically lands between $700 and $1,400 in Beverly Hills. The work takes one visit for most standard openings.
Double Car Door
Double doors in Beverly Hills run wide, and that’s where the installation gets more involved. A 16-foot double door in the Flats built for two daily drivers is a different animal than a 14-foot door on a Trousdale motor court holding a Ferrari and a Rolls. Both jobs get the same treatment: written price, documented scope, photo record. Double car door installation in Beverly Hills ranges from $900 to $2,200. Wider doors need heavier torsion springs, longer opener rails, and more careful track alignment. We don’t guess at any of it.
Custom Garage Door
Custom is the default in Beverly Hills, not the exception. Trousdale Estates mid-century homes routinely have openings 10 to 16 feet wide and up to 10 feet tall, sized for exotic car collections rather than standard SUVs. These doors must integrate with Crestron or Control4 automation. The LiftMaster opener rail gets paired with the home automation system so the door opens from the same touch panel as the gate, lights, and security. Custom garage door installation in Beverly Hills runs $700-$2,200, with the final number driven by door width, material, and the automation integration work. This specification level is routine in Beverly Hills and nearly nonexistent in West Hollywood or Culver City.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beverly Hills
We install and service doors from LiftMaster, Chamberlain, Genie, and Clopay. If you have a preference on opener brand, say so and we’ll spec it. If you don’t, we’ll recommend based on what the door needs and what the house’s automation system can support. For Beverly Hills clients with Crestron or Control4, LiftMaster’s integration hardware is usually the cleanest fit. We stock the common parts on our trucks, so a standard Beverly Hills install doesn’t stall because a bracket or torsion spring wasn’t in the van.
Common Garage Door Installation Problems We See in Beverly Hills Homes
- Original tilt-up doors on 1920s-1940s Flats homes. These doors still hang on swing-out or tilt-up hardware that predates modern sectional doors. Converting to a roll-up system while preserving the custom carriage-house look requires re-framing the opening and matching wood panel profiles, not just swapping hardware.
- Shallow headroom in Trousdale Estates. Mid-century homes on that hillside were built with garages so shallow that 4 inches of overhead clearance is common. Standard torsion spring setups won’t fit. A low-clearance conversion kit is the default, not an upsell.
- Santa Ana seasonal binding on premium wood doors. Mahogany and cedar doors on Beverly Hills estates absorb morning marine-layer moisture, then dry out hard when Santa Ana winds hit. The wood shrinks, the door binds in its track, and a homeowner who doesn’t know the cause will call a general handyman who “fixes” the wrong thing.
- DIY torsion spring conversions failing. People sometimes try converting an original Flats tilt-up door to a sectional themselves. The old spring pad wasn’t rated for the weight of a new door. When the spring lets go, the cable snaps and the door comes down. We’ve seen the aftermath more than once. That’s a dangerous fix to attempt without proper training. Call a professional.
Pricing for Garage Door Installation in Beverly Hills, CA
A new garage door installation in Beverly Hills starts at $700 for a standard single door and runs up to $2,200 for oversized custom doors with automation integration. That’s the flat range we quote from, and it’s the number you’ll see before anything is ordered or installed. The price changes based on door width, material, opener type, and integration work. What it doesn’t change on is the installer showing up and deciding the job “needs more” than quoted. Our price is written, scoped, and agreed before work starts.
| Installation Type | Beverly Hills Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Custom Garage Door | $700-$2,200 |
| Wood Doors | $700-$2,200 |
| Double Car Door | $700-$2,200 |
Every estimate is free. Bring us a written quote from another company and we’ll give you a free second opinion: we’ll look at their numbers, look at the door, and tell you if it’s fair. No coupon needed. The price is the price, written down.
We Also Serve Cities Near Beverly Hills
Our crews regularly work across Beverly Hills and the surrounding Westside. We also handle garage door installation in West Hollywood, Studio City, Culver City, and Sherman Oaks. If you’re a few blocks over the city line, same team, same written-price system, same photo record.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Beverly Hills
Yes. We install LiftMaster openers with integration modules that tie into Crestron and Control4 directly. The door opens from the same touch panel as the rest of the estate, no separate remote required. This is a standard specification on Beverly Hills custom doors. Call (213) 348-6550 and we’ll walk you through what the integration adds to the quote.
Yes, using a low-clearance torsion kit designed for exactly this condition. Trousdale Estates mid-century homes routinely have headroom of 4 inches or less, which makes standard torsion spring setups impossible. We’ve converted shallow motor court doors in Trousdale to sectional doors with low-clearance kits and paired them with integrated openers. The price falls within our standard $700-$2,200 door installation range, with the clearance kit accounted for in the written quote.
It will, but only if the wood is properly sealed and the track is aligned with seasonal movement in mind. Morning marine layer moisture keeps the wood swollen; fall Santa Ana winds dry it out and cause shrinking. A door installed without accounting for that movement will bind within a season. We spec hinges and track spacing for wood’s seasonal expansion range, and the photo record documents the initial alignment so we can adjust it if the door shifts. Wood doors in Beverly Hills run $700-$2,200 installed.
Because the wood or metal frame is responding to the sudden drop in humidity. Wood doors shrink, metal track shifts microscopically, and the door starts scraping. This is a seasonal Beverly Hills condition, not a defective install. We can realign the track or adjust the hinge spacing to stop the binding. The fix is usually a same-visit adjustment, and our 365-Day Done Right Promise covers making it right if the install was ours. Call (213) 348-6550 to get it scheduled.
Yes. We replace original tilt-up and swing-out wood doors on Flats homes with sectional roll-up doors that use custom wood panel profiles matched to the original carriage-house design. The exterior look stays period-correct. The hardware and operation move to modern torsion springs and a sectional track. This is one of the most common installations we do in the Flats, and it consistently lands in the $1,200-$2,200 range depending on the wood species and door size.
If you’re replacing or installing a garage door in Beverly Hills, call (213) 348-6550. You’ll get a written price before any work starts, a photo record of what was found and what was installed, and a door that works with the house and the cars. Estimates are free.
Written by Marcus Deller, Owner at Servo Garage Doors Los Angeles, serving Beverly Hills, CA.